| |
|
|
Olson Cool Blocks For Band Saw Blades |
|
|
Replace
Standard Metal or Plastic Guides with High-Tech
Cool Blocks and Fine Tune
Your Band Saw.
Poor
performing imitations abound. Only Cool Blocks® are
genuine!
|
Olson COOL
BLOCKS® blade guides are made from
a high tech, non-metallic composite material, "Graphite
Impregnated Phenolic Laminate", which contains
three synthetic dry lubricants that lubricate
the blade but do not make it oily. The metal
to metal contact made by old metal guide blocks
creates heat and friction which cause premature
blade wear and breakage. These problems are eliminated
with COOL BLOCKS blade guides which allow blades
to run cooler and last longer with less friction.
COOL BLOCKS blade guides will improve the cutting
performance of any blade width, but are especially
effective with 1/16" and 1/8" wide blades for
tight radius work.
|
|
| For
Delta 14" Band Saws. |
PLU |
Olson No. |
Description |
Price |
|
1737 |
CB50000 |
Contains:
3 guide blocks 1/2" x 1/2" x 3/4" and 1 guide block 1/2" x
3/8" x 1" |
$15.99 |
|
| For
Sears 12" Tilting Table Band Saws, Skil 10",
HD3640, and Dremel 10" 1120. |
PLU |
Olson No. |
Description |
Price |
|
1738 |
CB50010 |
Contains:
4 guide blocks 3/8" x 3/8" x
3/4" |
$15.99 |
|
| For
Shopsmith Band Saw. |
PLU |
Olson No. |
Description |
Price |
|
1739 |
CB50030 |
Contains:
2 guide blocks 3/8" x 3/8" x
1" and 2 guide blocks 3/8" x 1/4" x
1 1/2" |
$15.99 |
|
| For
most 14" Band Saws (including Sears Craftsman 14", Jet,
Grizzly, Ridgid, etc.) . |
PLU |
Olson No. |
Description |
Price |
|
1740 |
CB50050 |
Contains:
4 guide blocks 1/2 " x 1/2 " x
3/4" |
$15.99 |
|
| For
14",16" and 18" imported Band Saws using
12mm (.472") round guides. |
PLU |
Olson No. |
Description |
Price |
|
1741 |
CB50055 |
Contains:
4 guide blocks 12mm (.472")
dia. x 3/4" |
$15.99 |
|
| For
Delta 10" 28-140, 16" 28-560 3wheel, and 12" 28-190 Band
Saws. |
PLU |
Olson No. |
Description |
Price |
|
1742 |
CB50070 |
Contains:
4 guide blocks 5/16" square
x 3/4" |
$15.99 |
|
| Round
guides for 8" Delta 28-180 & 28-185 and 10" 3 wheel Benchtop
Saw Including: Delta 28-160 and 28-180 8" 2 wheel, Sears,
K-Mart, Ohio Forge, ProTech, Builder's Suqare. Most saw
taking 56 1/8" blades. |
PLU |
Olson No. |
Description |
Price |
|
1743 |
CB50080 |
Contains:
4 guide blocks 3/16"dia.
x 3/4" |
$15.99 |
|
| For
9" 2 Wheel Band Saw such as Ryobi, Black & Decker, Sears
Crafsman. Protech, Tradesman, and Collins, etc. |
PLU |
Olson No. |
Description |
Price |
|
1744 |
CB50085 |
Contains:
2 guide blocks 13/64" square x
13/16" and 2 guide blocks 13/64 square x 1" |
$15.99 |
|
| For
Sears Crafsman 12" Tilt-Head |
PLU |
Peachtree |
Description |
Price |
|
1745 |
FCB-K |
Contains:
4 guide blocks with
slot milled in them |
$15.99 |
|
|
|
