Olson has been a leading manufacturer of scroll saw blades for more than 80 years, offering a full line of superior quality blades to satisfy almost every scrolling application. Olson blades are for use with scroll/jig saw machines sold by Delta, DeWalt, Dremel, Skil, Rockwell, Pro-Tech, Powermatic,RB Industries, Hegner, Sakura, Shopsmith, Excalibur, Rexon, Ryobi, Sears Craftsman, and Makita. (virtually all domestic and imported scroll saws). They can also be used in hand held fret and jewelers saw frames.
These blades saw in all directions and have 360º cutting capability. Excellent for 0º radius scroll/fret work - you never have to turn the workpiece. Use for cutting all types of materials including wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. For use in power scroll saws and hand-held fret and jewelers saw frames. Cutting speed and finish depend on material thickness and number of teeth per inch. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. Good for bevel cutting letters in names. Increasethroat capacity and cut longer pieces without turning! |
|||||||||||
PLU |
Olson No. | Size. |
TPI |
Kerf | Qty. |
Application | Price |
||||
1305 |
SP461 |
0 |
46 |
.032" | 12 ea. |
For finer, more intricate cutting in
thin wood, plastic, wax, plaster, etc. to 1/4″. |
$3.99 |
||||
1306 |
SP463 |
2 |
41 |
.035" |
12 ea. |
Medium speed and medium rough finish
cutting of hard and soft wood, plaster and wallboard. |
$3.99 |
||||
1307 |
SP465 |
4 |
36 |
.041" |
12 ea. |
Medium speed and medium rough finish
cutting of hard and soft wood, plaster and wallboard. |
$3.99 |
||||
These blades have the same performance characteristics as our skip tooth fret saw blades with the added benefit of reverse teeth for a smooth, splinter free finish on top and bottom surfaces. Excellent blade for eliminating tear-out on birch and maple plywood.
|
Precision Ground Tooth (PGT®) Scroll Saw Blades are “The Best” blades available! Tested and endorsed by experts, PGT blades out perform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts. A unique tooth geometry and widely spaced gullets minimize burning and provide rapid chip removal. They are made of the finest carbon steel for maximum strength, durability and longest blade life. Blades are 5″ long with plain ends.
|
Unique tooth design allows the blade to cut on both the up and downstroke. Cuts a little slower for more control, which is especially useful in delicate fretwork. Finish is smooth with clean, sharp, splinter-free edges in hard/soft wood, plywood, plastic and Corian®. 2-way cutting action prevents melting behind the cut in most plastic including acrylic, lexan (polycarbonate), fiberglass, and plexiglas. Has no top or bottom for easy blade installation. Blade can be turned over for a fresh new set of teeth.
|
These blades saw in all directions and have 360º cutting capability. Excellent for 0º radius scroll/fret work - you never have to turn the workpiece. Use for cutting all types of materials including wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. For use in power scroll saws and hand-held fret and jewelers saw frames. Cutting speed and finish depend on material thickness and number of teeth per inch. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. Good for bevel cutting letters in names. Increase throat capacity and cut longer pieces without turning!
|
These blades are preferred by many scroll saw users. They are easy to distinguish from our regular skip tooth fret saw blades as having two teeth together followed by a flat space for efficient chip removal. Double tooth blades cut fast, leaving clean edges in wood and plastic. The New DT432 is considered the best blade for cutting wood veneer!
|
|
Skip tooth blades are available in more sizes than any other type Olson scroll saw blade. There is a complete range available from the New FR400 (#3/0) size for the finest of cutting to the FR410 for coarser sawing of thicker materials. For hand or machine sawing of wood, plastic and fibrous materials. Skip tooth blades cut fast, provide good chip clearance and smooth finishes.
|
For machines that require 5″ pinned blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, all 15″ and 16″ imported scroll saws.
|
